HandiFoam® Slow Rise (HFO)

Low-Pressure Pour-in-Place Polyurethane Foam (PIP)
Home » Product Lines » HandiFoam® Slow Rise (HFO)
HandiFoam Slow Rise

Formulated to completely fill voids and cavities, providing rigity and reinforcing the structure. Meets the Coast Guard specification requirements for flotation in Title 33 Code of Federal Regulations, paragraph 183.114.

HandiFoam Slow Rise (HFO) is available in a variety of disposable and refillable sizes and is dispensed using the patented Handi-Gun® Dispensing Unit.

This product is formulated utilizing an HFO blowing agent which is part of our ongoing commitment to developing foam chemistries with lower global warming impact and enhanced product performance.

Density

Disposable -
2.1 lbs./ft3 (35.2 kg/m3)

In Place:
2.00 lb./ft3 (32 kg/m3)

Tack-Free Time 60–90 seconds
Cuttable 5–10 minutes
Cell Structure >90% CLOSED cell content
Approvals

Title 33
HandiFoam Slow Rise Systems meet the specification requirements for flotation in Title 33 Code of Federal Regulations, paragraph 183.114

Shelf Life

6 months

Warning

 WARNING: CANCER  - www.p65Warnings.ca.gov

Item Number
Description
Size
Dispensing Type
Yield
P12042

HandiFoam® Slow Rise (HFO)

II-12
Disposable
12.7 FT3 (.36 m3)
P12043

HandiFoam® Slow Rise (HFO)

II-41
Disposable
41.7 FT3 (1.18 m3)
P23001

HandiFoam® Slow Rise (HFO)

8 gallon
Refillable
70 FT3 (1.98 m3)
P23101

HandiFoam® Slow Rise (HFO)

27 gallon
Refillable
245.2 FT3 (6.95 m3)
P23201

HandiFoam® Slow Rise (HFO)

60 gallon
Refillable
563.81 FT3 (16 m3)
P23301

HandiFoam® Slow Rise (HFO)

120 gallon
Refillable
1024.7 FT3 (29 m3)
  • Insulation
    • Commercial & Industrial
      • Industrial piping
    • OEM
      • Metal door filling
      • Buoyancy for floating docks
    • Other
      • Post installation void filling (ie. hollow stadium seats)
      • Statue repair
      • Marine applications

Use our Yield Calculator to determine how much low pressure polyurethane foam you need to complete your next project.

*Yields are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application. Other two-component foam product yields are shown on the specific Technical Data Sheet. These examples are representative of other products of similar size.

  • This field is for validation purposes and should be left unchanged.