HandiFoam® HVLP

Low Pressure Spray Polyurethane Foam (SPF)
Home » Product Lines » HandiFoam® HVLP

HandiFoam® HVLP is a high volume, low pressure (HVLP) foam system designed for smaller precision jobs, full insulation jobs and any job in-between. The 55-gallon drums containing HandiFoam® HVLP are hooked up and dispensed through the innovative Nitrosys Plus Dispensing Unit. The Nitrosys Plus Dispensing Unit auto-calibrates the A and B-chemicals while pre-heating the material and delivering it with third stream air to the gun at low pressures (< 200 psi) and high volumes. This system is perfect for new contractors, specialty and weatherization rigs for large contractors, and OEMs. HandiFoam® HVLP is available in a variety of formulations in 55-gallon disposable drums and is dispensed using the patented Handi-Gun II® Dispensing Unit. HandiFoam HVLP is available in the following formulations:

  • HandiFoam HVLP MD 2.0 (P60010)
  • HandiFoam HVLP LD 0.5 (P60012)
  • Additional information coming soon!
R Value

Aged 90 days at 140°F (60°C):
6.7/in. at <4" thick
6.9/in. at >4" thick


2.0-2.3 lbs/ft3 (32-36.8 km/m3)

Cell Structure 98% CLOSED cell content
Fire Rating

Tested at 4" thickness

Flame Spread: <25

Smoke Developed: 4<450


ESR 4287
NFPA 286

Shelf Life

6 months (when stored unopen at 50–80°F)


 WARNING: CANCER  - www.p65Warnings.ca.gov

Item Number
Dispensing Type

HandiFoam® HVLP LD 0.5

55 gallon
17,000-21,000 bdft. (40.12-49.56 m2)

HandiFoam® HVLP MD 2.0

55 gallon
4200-4800 bdft (9.9-11.34m2)

  • Insulation
    • Commercial & Industrial
      • Asbestos abatement and encapsulation
      • Metal buildings
      • Sealing silos and storage bins
      • Cold storage insulation
      • Insulating storage tanks (gas, industrial, winery, etc.)
      • Sealing the roof/wall juncture
      • Retrofitting windows
      • Industrial piping
      • Sound deadening interior walls
    • OEM
      • Manufactured housing
      • Refrigerated trailers
      • Commercial vehicles
      • Air handler/HVAC
      • Hot tubs
      • Trailers
      • Recreational vehicles
      • Temporary emergency structures
      • Vehicle doors
      • Sealing precast concrete forms
    • Other
      • Pipe pillows / pipe support
      • Foam shape creation
      • Post installation void filling (ie. hollow stadium seats)
      • Theater set design
      • Swimming pool construction
      • Statue repair
      • Statue creation
      • Taxidermy
      • Repairing and sealing damaged cargo containers
      • Insulating military tents
      • Filling post/pole holes
      • Temporary seal of hopper cans
      • "Tree surgery"
    • Residential
      • Air sealing attic
      • Bath tub insulation and leveling
      • Sealing insulation board joints
      • Foundation insulating
      • Residential wall insulation
      • Thin coat of spray foam to seal and insulate for "flash and batt"
      • Sealing attic baffles
      • Post mold remediation sealing
      • Mobile home skirt sealing
      • Sealing can lights
      • Sealing ductwork joints
      • Insulating & sealing rim/band joists
      • Insulating crawl space wall
      • Insulating cathedral ceilings
  • Sealants
    • Residential
      • Air sealing attic
      • Sealing can lights
    • Commercial & Industrial
      • Sealing silos and storage bins
      • Retrofitting windows

Use our Yield Calculator to determine how much low pressure polyurethane foam you need to complete your next project.

*Yields are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application. Other two-component foam product yields are shown on the specific Technical Data Sheet. These examples are representative of other products of similar size.

  • This field is for validation purposes and should be left unchanged.