HandiFoam® Commercial Vehicle

Low-Pressure Spray Polyurethane Foam (SPF)
Home » Product Lines » HandiFoam® Commercial Vehicle Low-Pressure Spray Polyurethane Foam (SPF)
HandiFoam Commercial Vehicle

HandiFoam® Commercial Vehicle low-pressure, spray polyurethane foam is a chemically cured, two-component system designed specifically for use in a vehicle’s undercarriage, engine compartment and frame. The foam provides a protective layer and helps reduce vibrations, leading to an increase in the longevity of the vehicle and providing a more comfortable operating environment by deadening sound. HandiFoam® Commercial Vehicle is black in color which allows the foam to blend in with the vehicle and its components.

HandiFoam® Commercial Vehicle is available in a variety of disposable and refillable sizes and is dispensed using the patented Handi-Gun® Dispensing Unit.

R Value

5.5 at 1" thick


Free Rise:
1.70 lb./ft3 (27.3 kg/m3)

Tack-Free Time 30–45 seconds
Cuttable 1–2 minutes
Fully Cured Time 1 hour
Cell Structure 90% CLOSED cell content
Fire Rating

ASTM E84 Class 1 (A) at 1" thick

Flame Spread: 15

Smoke Developed: 195

Shelf Life

6 months – Refill
12 months – Disposable


 WARNING: CANCER  - www.p65Warnings.ca.gov

Item Number
Dispensing Type

HandiFoam® Commercial Vehicle

205 bdft (19 m2)

HandiFoam® Commercial Vehicle

605 bdft (56.2 m2)

System 8 HandiFoam® Commercial Vehicle

8 gallon
1040 bdft (97 m2)
  • Insulation
    • OEM
      • Commercial vehicles
      • Trailers
      • Recreational vehicles
      • Vehicle doors
      • Recreational vehicle sound deadening and underside protection
    • Other
      • Insulating and sealing chicken coops
      • Post installation void filling (ie. hollow stadium seats)
  • Sealants
    • Other

Use our Yield Calculator to determine how much low pressure polyurethane foam you need to complete your next project.

*Yields are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application. Other two-component foam product yields are shown on the specific Technical Data Sheet. These examples are representative of other products of similar size.

  • This field is for validation purposes and should be left unchanged.