HandiFoam® AFS low-pressure, one-component, polyurethane foam adhesive is a moisture cured foam adhesive formulated for use with architectural foam shapes and moldings of all sizes. This provides a quick, easy-to-apply, strong bond to almost any surface. Unlike many other solvent-based adhesives, HandiFoam® Architectural Foam Shapes adhesive will not degrade polystyrene.
HandiFoam® Architectural Foam Shapes is available in gun foam and is dispensed using a Handi-Tool® Dispensing Unit.
1.11 lb/ft3 (17.8 kg/m3)
|Fully Cured Time||12–24 hours|
|Full Bond Time||7 days|
|Open Time||3 minutes|
|Third Party Test||
HandiFoam® AFS Adhesive
*Yields are based on theoretical calculations, for comparison purposes, and will vary depending on ambient conditions and particular application. Other two-component foam product yields are shown on the specific Technical Data Sheet. These examples are representative of other products of similar size.